contact us
+44 77 46 180 000
+44 78 92 346 792

Measuring (templating) and fitting granite worktops

Preparation for measuring (templating) your granite worktops
Granite is very heavy. It weighs more than 90 kilograms per square metre.
By its very nature, granite is a very dense and heavy material so it is not practical to provide lengths of granite worktops in excess of three metres. We also reserve the right to add joints where necessary to conform with health and safety guidelines or where access is restricted.

Delivery and Fitting
We operate National Wide throughout the UK and within parts of the EU. Contact us for EU availability at: info@
We normally deliver and fit within 2 weeks of an order being placed

Remove any cupboard fronts and other items that may get damaged
When handling granite, our fitters are extremely careful. However, the granite worktops are very heavy and can be difficult to handle in confined spaces in kitchens and bathrooms. Therefore please remove cupboard fronts and any other items that may get damaged during fitting of granite worktops. We can not take responsibility for damage to such items that are left in place

Fitting sinks in granite worktops
Please ensure that suitable space and support is provided for the sinks. In most cases a sink will come with fitting instructions that will explain how to adapt the base unit to provide adequate room and support for the sink.

Our templater will be able to explain what needs to be done by you (or your builder or kitchen fitter) before or after our worktop fitters do their work. If our fitters need to do extra work when they arrive to accommodate sinks they may need to make an additional charge at the time.

Heavy Undermounted Sinks
In most cases heavy undermounted sinks, such as enamel sinks, recommend that a wooden frame is contructed all around the kitchen sink and the gap between the granite worktop and sink sealed with silicone. In our experience, building a wooden support frame is best done after the granite worktop has been fitted. This will need to be done by you (or your builder or kitchen fitter). If this is the case our granite worktop fitters can help by gluing the sink to the bottom of the granite worktop so that the wooden frame can be constructed afterwards.

Stainless Steel Undermounted Sinks Our fitters will screw and glue stainless steel sinks to the granite worktop using sink clips (which normally come with the sink). They will also seal with clear silicone the joint between the worktop and sink

Fit splash backs
Please note walls are rarely straight or square consequently there may be small gaps between the granite worktop and the wall. Therefore we advise that a splash back is fitted with the granite worktop or the wall tiled after the worktop is fitted. Our fitting team may also need to slightly modify walls next to the granite worktop. Naturally every care is taken to minimise the impact and damage of such work, but Craftsman Ltd can not take responsibility for live plaster falls. It is the customers responsibility to prepare the walls appropriately and repair any such damage

Extra hands On some occasions, especially when granite worktop pieces are particularly large and/or cumbersome (e.g. large islands of granite worktops), it may be necessary to arrange a extra people to assist in lifting and moving the granite worktops into place. The customer may provide the extra people and in this case Ltd cannot accept liability for the wellbeing of those people. If the customer does not have additional helpers available, a separate charge may be levied by Craftsman Ltd for providing the necessary manpower. However, your templater will be able to identify such situations at an early stage, and all arrangements will be subject to negotiation

Water and Gas fitting
We fix sinks and hobs to the granite worktops, but you should ask a suitably qualified plumber and gas fitter to connect the water and gas

Looking after your beautiful granite worktops
Our staff are happy to advise. We have set up page to help our customers

Defects and imperfections
Granite is a natural material and on rare occasions can have defects or imperfections due to the natural working characteristics of materials supplied. There may be small chips which arised in the course of manufacture, delivery and/or installation. We reserve the right to replace or repair minor defects entirely at our own discretion. We also reserve the right to use chemical or resinous fillers, some of which may already be present in the granite worktop to effect any repairs

Health and Safety
It is our policy to provide and maintain safe and healthy working conditions for all our employees and visitors to our premises. Regular work place risk assessment and management ensures minimal potential of possible harm.

We ensure safe equipment and work practices for all our employees and sub-contractors.

We provide a safe and healthy environment for all our employees and take account of their welfare needs.

We recognise the need to provide up to date information, regular training and competent supervision where required. We discuss health and safety with employees, allowing them to raise concerns and influence decisions.

Insurance in place
We also acknowledge our legal responsibility for the health and safety of our employees, clients and other people who may be affected by our business or products. Therefore we have employers, public and products liability insurances.

All rights reserved